Changelog
What's new in each release. See GitHub Releases for the full history.
2.0.0 (November 16, 2026)
- New: a Pairing assistant that taps Pair on your phone's pairing prompt for the device. Switch on Skip the pairing prompt and allow it in your phone's Accessibility settings. See Skip the pairing prompt.
- New: on rooted phones, Pair silently with root confirms the pairing for you, so the pairing prompt never shows.
- Fixed: Pokémon GO could not connect to the device while the app was connected. The app now disconnects when you leave it.
- Changed: the app no longer connects to your last device when you open it. Scan and pick the device.
- New: a Battery row in Status shows the charge left, for devices built with a battery reader. Your phone also shows it in its Bluetooth settings. Thanks to Zeldo Kavira.
- New: the Install and update firmware page installs or updates the firmware from your browser.
- New: a Theme row in About switches the app between your phone's setting, light, and dark. Tap it to change. The app remembers your choice.
- New: the app is available in French. On Android 13 or newer, About has a Language row to pick the app language.
- New: after an update, the app shows what is new once, with a link to this changelog.
- Improved: the app has larger text and larger buttons, shows a ripple when you tap a row, and works with a screen reader such as TalkBack. The profile counters now read Caught, Fled, and Spun.
- New: an optional Game monitor in Settings. When you turn it on, the app alerts you when Pokémon GO loses the device, the bag or Pokémon box is full, the balls run out, or a spin gives nothing. It reads only the Pokémon GO notification on your phone and stores or sends nothing.
- New: Share report in Diagnostics sends the app, phone and device details and all three dumps in one message. It hides the secret codes of each connection.
- New: profile cards show the name of the phone and the end of its address, and are numbered from 1 to 4. The app needs the matching firmware version for the name.
- New: the app has four tabs at the bottom: Dashboard, Settings, Diagnostics, and About. Diagnostics and the Danger zone no longer sit next to your profiles. About links to the help pages, the privacy policy, the acknowledgements, and the GitHub issue tracker.
- New: the device light shows its state: slow blinking while it waits for a phone, 1 to 4 blinks for that many connected phones, fast blinking when it has no secrets, and three long flashes after a crash restart. A Status light switch in Settings turns it off. The app needs the matching firmware version for the switch.
- New: Autocatch has three modes per profile: off, new (only Pokémon you have not caught yet), and all. Tap the CATCH dot to change it. Your current setting carries over. The app needs the matching firmware version for new.
- New: a profile shows Bag full, Box full, or No balls in red when Pokémon GO reports it. The note goes away when the game shows its next normal signal. The app needs the matching firmware version.
- New: after the device crashes and restarts, the app shows a Crash report card. You can share the details for a bug report or dismiss the card. The app needs the matching firmware version.
- New: the Known devices card shows how many Pokémon each phone caught, how many fled, Pokéstops spun, full bags, full boxes, and out-of-balls events, all time and for the current connection. The counts survive a restart. Each phone has a Reset stats button. The app needs the matching firmware version, and the counts start at zero after the update.
- New: the Activity card shows what happens in Pokémon GO as it happens, such as a Pokémon caught or a full bag, and the app updates its numbers right away instead of waiting for the next check. The app needs the matching firmware version.
- New: the Known devices card lists the phones that connected to Pokémon GO through the device, newest first. You can name a phone or forget it. The device keeps 15 phones and drops the one used longest ago. Phones paired before this update appear after their next connection. The app needs the matching firmware version.
- New: the app connects to your last device when it opens and reconnects after a dropped connection.
- New: the app tells you once a day when a newer release exists for the app or the device firmware.
- New: update the device firmware from the app over Bluetooth. Hold the board button for 3 seconds to allow it. The device goes back to the old firmware if the new one does not start. Holding the button for 3 to 9 seconds no longer turns Advertising on or off.
- New: Forget all pairings in the Danger zone clears every pairing and setting but keeps the device's identity. Holding the board button for 10 seconds does the same without the app. The app needs the matching firmware version.
- New: a device with no secrets now starts in setup mode, and the app can import your secrets file over Bluetooth. Before, it stayed silent until a USB reflash. The app needs the matching firmware version.
- Changes made from the app now apply the value you picked, so a repeated tap or a second phone cannot undo it. The app needs the matching firmware version.
- New: the app shows an About device card with the firmware version and health details, and asks you to update firmware that is too old.
- Fixed Advertising switching itself back on after you turned it off in the app, and after a device disconnected.
- New: the Status card shows whether the device is currently sending out its Bluetooth signal.
- On Android 16 and newer, the app now repairs a broken pairing by itself.
- The app now shows errors while connected, in plain language with the error code in brackets.
- Settings now save the moment you change them, and the Save to device button is gone. The app needs the matching firmware version.
- Updating the device firmware now keeps your pairings. The first update to this version needs one USB reflash, and you pair Pokémon GO once more.
- The device now keeps retrying to start Advertising if the first attempts fail.
- New: the app has its own launcher icon and is named PGPemu Companion. It opens in the light or dark look of your phone without a white flash first. Phones without Bluetooth Low Energy cannot install it.
1.0.1 (February 18, 2026)
- Fixed a stall that could leave a connection queue stuck.
- Fixed a crash that could occur during device handshakes.
1.0.0 (February 1, 2026)
- New: per-device settings, so each connected Pokémon GO account keeps its own Autospin and Autocatch state.
- New: caught, fled, and spin counters shown per device.
- New: log levels, for more or less detail when diagnosing a problem.
- Autospin now pauses automatically when the item bag is full, and resumes on its own once there's room.
- Reconnecting to a previously paired account is now faster and more reliable.
- Settings are restored automatically on every new connection.